 tech
support -------------------------- certificates-------------------------- how
to use-------------------------- referances-------------------------- |
|
|||
| DO | DON'T | ||
|
Do select the right FIBC for the job in consultation with the manufacturer
or supplier. |
Don't choose FIBCs without consulting the manufacturer or supplier. |
||
| Do
read the instruction label on the FIBC. |
Don't
exceed the SWL in any circumstances. |
||
| Do
inspect reusable FIBCs before refilling. |
Don't
fill the FIBCs unevenly. |
||
| Do
check that the discharge spout is closed off before filling. |
Don't
stop or start suddenly during transportation. |
||
| Do
ensure that the filled FIBC is stable. |
Don't
subject FIBCs to snatchlift and/or jerk stops. |
||
| Do
close the top inlet correctly. |
Don't
drag FIBCs. |
||
| Do
use lifting gear of sufficient capacity to take the suspended load. |
Don't
allow personnel under suspended FIBCs. |
||
| Do
adjust the distance between fork lift arms to the correct width
for the FIBC being handled. |
Don't
allow FIBCs to project over the side of a vehicle or pallet. |
||
| Do
tilt the mast of the fork lift truck rearwards to an appropriate
angle. |
Don't
tilt the mast of the forklift forward. |
||
| Do
ensure that crane hooks, bars or fork lift arms used for lifting
ar of adequate size and are rounded to at least the thickness of
the sling, belt or rope suspension, with a minimum radius of 5mm. |
Don't withdraw the fork lift arms prior to relieving all the load
on the lifting devices. |
||
| Do
take appropriate measures in regard to dust control. |
Don't
stack FIBCs unless sure of stability. |
||
| Do
consider the possibility of static electricity hazards. |
Don't
use FIBCs in new conditions without consulting the manufacturer
or supplier. |
||
| Do
protect the FIBCs from rain and/or prolonged sunlight. |
Don't
reuse single-trip FIBCs. |
||
| Do
ensure the FIBCs are adequately secured in transportation. |
Don't
repair heavy duty reusable FIBCs unless the as-new requirements
can be met. |
||
| Copyright © 2005 MSN Packaging www.msnpackaging.com | info@msnpackaging.com |
